How to Hotwire a Motorcycle.
by

How to Hotwire a Motorcycle: What to do if you’ve misplaced your key

If you’re a motorcycle owner, there’s always a possibility that you may misplace your key. Whether it’s at the bottom of your purse or in between the couch cushions, it happens to the best of us. If you find yourself in this predicament, don’t fret! There is a way to start your motorcycle without your key. Also, if the motorcycle key is broken or lost, you should contact a specialist to make a new key, but for safety reasons, it is better to change the ignition switch for a new one.

And do not think that this is a manual for thieves. Believe experienced motorcyclists, when the key is lost on the road, and there is still a long way to go, any motorcyclist needs to know how you can start the bike without a key and get to your destination.

Tools you’ll need to start your bike without keys

In order to hotwire your motorcycle, you’ll need a few tools. Firstly, you’ll need a wire stripper. This will be used to strip the insulation off of the wires. Next, you’ll need a pair of pliers. You’ll use this to twist the wires together. Finally, you’ll need a screwdriver. This will be used to remove the seat so that you can access the wires.

How to Hotwire a Motorcycle Step-by-Step

Now that you have your tools, it’s time to hotwire your motorcycle! Here’s a step-by-step guide on how to do it:

  • Step One: To start a motorcycle without a key, your goal is to start the ignition with the wires that do it. The first step is to remove the front panel or front trim. This will give you access to the wires. Use your screwdriver to remove the screws that hold the front panel or front trim in place. These ignition wires help turn on the motorcycle. They connect to the ignition and other parts of the motorcycle.
  • Step Two: So you’ve found and accessed a bundle of wires. Locate the two wires that go to the ignition switch. These are usually located under the gas tank. Once you’ve located these wires, use your wire strippers to strip the insulation off of them.
  • Step Three: Now that the insulation is off of the wires, it’s time to twist them together. Use your pliers to twist the two wires together.
  • Step Four: With the wires twisted together, it’s time to start the motorcycle! Touch the twisted wires to the battery terminals and voila! You’ve successfully hotwired your motorcycle.

You will be interested: What are the best helmets on the market today?

Hotwiring Strategy 2

Step One: Remove the Ignition

The first step is to take out the entire ignition switch. This will give you access to the wires that go into it. Use a screwdriver to remove the screws that hold it in place. The wires you’re looking for are the ones that go to the solenoid.

Step Two: Transfer battery power to the ignition

Now that you have access to the wires, you need to find a way to get battery power to the ignition. The best way to do this is by using a jumper wire. You’ll need to connect one end of the jumper wire to the positive terminal of the battery and the other end to one of the wires going into the ignition switch.

How to Prevent Hotwiring

Motorcycle thefts can be prevented by taking a few simple precautions. One of these is to always keep your bike locked up when you’re not using it. Another is to make sure that the ignition is properly secured. You can do this by using a strong lock and making sure that the switch is in the off position. Finally, you should consider investing in an alarm system. This will deter thieves and make it more difficult for them to hotwire your motorcycle.

Final Words

If you find yourself in a situation where you need to hotwire your motorcycle, don’t panic! If done correctly, your motorcycle should start without a key! With this step-by-step guide, you’ll be back on the road in no time. But it’s better if you’ll remember to always have a spare key.